雙室式燜燒爐
本文作者:石家莊鵬遠自動化工程技術有限公司 發布時間：2019-07-26
燜燒爐是經過預脫漿處理后的玻璃纖維布或石蠟型玻璃纖維布上的浸潤劑殘留量0.2-0.4%降至到0.04%，使其玻璃纖維布具有足夠的強度，又使其作為絕緣材料可以完全滿足高溫性能的要求。
Double rooms burning furnace
Burning furnace is used to reduce the remaining infiltration agent of glass fiber cloth and paraffin type glass fiber cloth which had been pre desized from 0.2-0.4% to 0.04% to make it the enough strength and fully meet the requirements of high temperature performance as insulating materials.
技術性能：
①爐子用途：玻璃布燜燒
②生產能力：2x64卷
③工作溫度：350-500℃
④升溫時間：4-8h
⑤保溫時間：由生產工藝確定
⑥降溫時間：3h
⑦能源：電、天然氣、煤氣、油、蒸汽（根據用戶能源選擇）
Technical characteristic:
結構簡單，維護方便，各室可獨立工作；
外置獨立加熱室，空空換熱，保證燜燒爐使用潔凈熱空氣；
熱風強制對流、噴射換熱，提高熱交換效率；
高可靠性熱循環風機，風機冷卻采用風冷和水冷，提高風機使用壽命；
采用高溫離心風機強制排廢；
獨特機械爐門防墜裝置；
爐門自動提升裝置；
燜燒實現自動控溫；
可選擇配置燜燒爐內工裝（燜燒輥、燜燒架）；
爐體內壁、加熱室內壁、風管全部采用不銹鋼板。
Machine Features：
Simple structure, convenient maintenance, each room can work independently.
External independent heating chamber, heat transfer, ensure burning furnace uses clean hot air.
Hot air is forced to convect, jet heat exchanger, heat exchange efficiency.
High reliability thermal cycling fan, fan is cooled by air and water to improve the service life of the fan.
Use high temperature centrifugal fan forced exhaust.
Unique mechanical door for device.
Oven door lifting device automatically.
Optional configuration burning furnace tooling (burning roller, burning frame).
The inner wall of the furnace body, heating indoor wall and duct are all made of stainless steel plate.
Double rooms burning furnace
Burning furnace is used to reduce the remaining infiltration agent of glass fiber cloth and paraffin type glass fiber cloth which had been pre desized from 0.2-0.4% to 0.04% to make it the enough strength and fully meet the requirements of high temperature performance as insulating materials.
技術性能：
①爐子用途：玻璃布燜燒
②生產能力：2x64卷
③工作溫度：350-500℃
④升溫時間：4-8h
⑤保溫時間：由生產工藝確定
⑥降溫時間：3h
⑦能源：電、天然氣、煤氣、油、蒸汽（根據用戶能源選擇）
Technical characteristic:
- The use of the furnace: Burning glass cloth
- Production capacity: 2x64
- Working temperature: 300-500 ℃
- Heating-up time:4-8h
- Holding time: determined by the production process
- Cooling time:3h
- Energy: electricity, natural gas, gas, oil, steam (energy according to user's choice)
結構簡單，維護方便，各室可獨立工作；
外置獨立加熱室，空空換熱，保證燜燒爐使用潔凈熱空氣；
熱風強制對流、噴射換熱，提高熱交換效率；
高可靠性熱循環風機，風機冷卻采用風冷和水冷，提高風機使用壽命；
采用高溫離心風機強制排廢；
獨特機械爐門防墜裝置；
爐門自動提升裝置；
燜燒實現自動控溫；
可選擇配置燜燒爐內工裝（燜燒輥、燜燒架）；
爐體內壁、加熱室內壁、風管全部采用不銹鋼板。
Machine Features：
Simple structure, convenient maintenance, each room can work independently.
External independent heating chamber, heat transfer, ensure burning furnace uses clean hot air.
Hot air is forced to convect, jet heat exchanger, heat exchange efficiency.
High reliability thermal cycling fan, fan is cooled by air and water to improve the service life of the fan.
Use high temperature centrifugal fan forced exhaust.
Unique mechanical door for device.
Oven door lifting device automatically.
Optional configuration burning furnace tooling (burning roller, burning frame).
The inner wall of the furnace body, heating indoor wall and duct are all made of stainless steel plate.
冀公網安備 13010402002446號